PAGE 4

Small handles.
The biggest one. The first of the two small ones The second of the two small ones And all mounted


Some kind of cylinder with a transfermekanism....
The drawing of the part. Mounted And glued in place At another angle


Some overall progress


The part that attaches the barrel to the slide and the part that holds the barrel to the top of the slide
Two copper rods connected at the rear end. Rear view The drawing of the part that connects the barel to the front part of the slide. Parts are ready for mounting
The drawing of the top part. The finished part The part is mounted on the barrel Overview


The lock mechanism for the ammo
The drawing of the part. Parts glued to the right sizes of card and cutted out Assembled At another angle
Another angle. Another angle And the part is mounted inside the construction Rear view


The part between the two layers of front shield
The drawing of the part. Parts to be used The finished part.Front And back side
Also adding rivets to different parts along the way.... Distance pieces glued onto the inner part The inside And the three parts lined up.

Details on the inside

Details on the inside


Dampers
The drawing of the part. Parts for the two cylinders The finished parts And mounted in place


The last details
The optik. The optik The optik in place Closeup


The cannon is done
The optik. The optik The optik in place Closeup

PREVIOUS PAGE HOME GALLERY

The model can be bought atDRAFMODEL



ŠJohnny Svensson 2007